king quad 450 rdc lift installed

[slanteye_z]

i got the lift installed. couldnt be happier!
front took about 30-40 mins
http://i485.photobucket.com/albums/rr211/slanteye_z/90189a0b.jpg
rear took a lil over an hour since i had to modify it and find bolts
http://i485.photobucket.com/albums/rr211/slanteye_z/7c3981dc.jpg
http://i485.photobucket.com/albums/rr211/slanteye_z/af84b606.jpg
the money shot
http://i485.photobucket.com/albums/rr211/slanteye_z/9ae60e5f.jpg

i ran into a small problem with my rear A arm skid plates so i drilled the hole out to 25/64 and tapped it 7/16 20. i went fine thread so i could get alot of threads in it. Then i ran the bolt from the inside out into the tapped piece with red lock tight, cut it flush then put everything back together. Heres a few pics to clarify
http://i485.photobucket.com/albums/rr211/slanteye_z/c9385d96.jpg
http://i485.photobucket.com/albums/rr211/slanteye_z/14884ccc.jpg

[slanteye_z]

o and on the bolt i put in i had to use a cap head allen for clearance

and another pic of the rear
http://i485.photobucket.com/albums/rr211/slanteye_z/17b65421.jpg

[ready2goriding]

Made an already good looking bike even better! Very nice!

[swampthing]

That's sweet, someone stole my 07' 450 6 months after i got it...great machine though, I like it blacked out

[Rubberdown]

Looks great, glad it was usable for you.

[slanteye_z]

glad to be the test dummy! you ever need to test fit anything on a 450 im in! ill go beat the hell outta it tommorrow!

O! another thing about the kit. i found it alot easier to take the front shocks out get the top bolts all started then put the bottom one back and tighten, just a fyi...

and those are 26 inch mudlites just for reference.