Parted out 03 Polaris 700

["Bankrupt"]

Tried this on that "other" site but the thread was locked because I didnt list prices for every single thing.

Parted out a 03 Polaris 700 Sportsman. The motor, front and rear diffs, speedo, axles, wheels and tires are gone. But EVERYTHING else is still here.

Drop me a PM or post here with what you need and ill reply with a price.

[Rubberdown]

what color are the plastics?

["Bankrupt"]

the plastics are blue/silver but they arent in good shape. i cut the front fenders back when i didnt know better.

the rear are fine but nobody wants 1/2 a set of plastics.

[Riven]

OK here goes. How much for...

Handle bars
Right side foot well. I think the 03 is the same as 04.
Ignition switch
& CDI box if it reves higher than my 600. I max at 6810rpm

["Bankrupt"]

i have the handlebars, ignition switch and CDI. (not sure how high it revs cause the 03 didnt have a tach.) but it never failed to fire and has never cut out on me while i was riding it. the handlebars are in good shape and the ignition switch is almost brand new.

the footwells were cut and shortened by 1.5" to allow for more clearance. its a great way to keep the tires from rubbing but makes them useless if your running small tires.

make me a offer on the 3 items. im not out to stick it to anybody. just wanting to help somebody get what they want and me move some stuff and maybe make a dollar or 2.

[Riven]

OK i will look into the CDI & see if the 03 700 was set higher than the 600 was.
As for the footwell Im not sure. I just want to replace my busted one with a stock one.

I will be in touch later
Thanks.

[Riven]

Did some digging & the CDI wont work.
Let me think if their is anything else i could use.

[Rubberdown]

Is the air box the same style as on the 04 500HO, probably right? Did you snorkle that with a better lid with 2 hoses on the top of it, or is it still a stock style air box?

["Bankrupt"]

the airbox lid didnt have any holes cut in it. i used a plastic piece and blocked off the hole on top.

the bottom of the box is where i cut the holes. it has a 1.5" hole in the bottom.

as for it being the same. i dont know. it looks the same as the one on my new bike, but i havent tried it to know for sure.

[Rubberdown]

So it only has 1 hole for the airbox for the snorkle? I thought if you made the airbox snorkel go to the front rack it would require 2 tubes or you would have to rejet the carb???? Did you "T" it into 2 hoses then? Where in the bottom of the box, like the VERY bottom?

I may take it off your hands if you can sort of explain how you had that machine snorkled for the air box because I want to run dual stack's for my air box and turn the nut buster into a cup holder or something.

["Bankrupt"]

no, i only had 1 pipe for the airbox (was my first snorkle job) but it needed 2.

i did rejet the carb but it still wasnt enough. i should have put 2 but like i said, i didnt really know what i was doing. the hole for the pipe is ran out of the bottom of the box, close to the rear. another could be added easily. and it really need to have 1 more. i think even with a 500 it should have 2.

with your being a carb, its a ton easier to snorkle than my efi. and with yours being a 500 (single) and not a 700 (twin) it should be even easier.

["Bankrupt"]

ok, just posted this at the "other site"


wanted to give anybody here a chance too.

got a entire 2003 sportsman 700 parted out. the tranny, motor, diffs, speedo, axles, wheels/tires are already gone. a few of the odd parts are gone also. like the racks and foot brake master cylinder.

all suspension parts are here. all calipers, rotors are here also. starter sylinoid, frame, controls, handle bars, wiring, misc parts off the motor (waterpump, covers, and other bolt on stuff)

i need this stuff out of my way.

ill take 20.00 per part + shipping or any 2 parts for 30.00 + shipping. (ill take less for tiny parts)


i got the carb too. ill take 70.00 + ship for the carb. it was just rebuilt and has a dyno-jet kit installed.

so just name a part you need and if i got it 20.00, or name 2 parts for 30.00.

[hydnseek]

Loooking for a rad fan, thats still nice and quiet :)

["Bankrupt"]

cant help ya there.

the fan i had was pretty LOUD. it had already had its better days.

[SPORTSMAN70003]

pm sent.

["Bankrupt"]

pm sent.


replied.

[SPORTSMAN70003]

pm'ed again.

["Bankrupt"]

replied :)

[Big_N_Bad]

Hey Polaris700 do you have The Front Struts and are the tops threaded and the part where you attach a wrench to it are they still in good shape and how many miles were on the quad( basically are they worn out or not) Thanks and let me know I will need both of them. Thanks

BNB

["Bankrupt"]

the struts arent in great shape. i think i remember one started leaking after we made a 13 hour trip to texas last year for mud nats.

[Big_N_Bad]

Dang thanks though, Ill probably hit you up for Something else soon,


BNB

[SweetSportsman]

hey i was wondering if you still had the floor boards that are shortened. because i need a set like that. thanks

["Bankrupt"]

hey i was wondering if you still had the floor boards that are shortened. because i need a set like that. thanks

i sure do.

[SweetSportsman]

Sweet, how much do you want for both of them shipped? ((I live in Maine))do you take paypal? Also do you have a pic of them so I can see how much they where cut, also what condition are they in, condition doesn't matter to much because mine are all smashed. One more thing do you have a list of what you have left? thanks

[SweetSportsman]

Hey I was looking on you myspace and saw a pic of your old blue one do you still have the brush guard for that?

[Rubberdown]

Eric, what do you want for the tank and gas cap buddy, I gotta get started on that project?

["Bankrupt"]

Hey I was looking on you myspace and saw a pic of your old blue one do you still have the brush guard for that?

the floorboards are in good shape. and yes, i still have the brush guard.

[SweetSportsman]

pm sent on the floorboards and how much do you want for the brush guard

[torkmonster]

So what all is left on that quad???

["Bankrupt"]

So what all is left on that quad???

Frame with clear title. handlebars and a few of the controls. a arms and suspension. 1 or both front strut towers. seat, rear bearing/axle housings and alot of other misc stuff that i cant remember.

just some misc parts. most of the highly sought after parts are gone. no motor, trans, axles, tires, front or rear diff.

[RODKNOCKER]

do you have one of the front caliper mounting brackets? if so what do you want for it shipped to mt holly NC 28120

["Bankrupt"]

do you have one of the front caliper mounting brackets? if so what do you want for it shipped to mt holly NC 28120

umm, unless im mistaken, the caliper bolts directly to the strut housing.

[RODKNOCKER]

it's number 9 in the picture

[RODKNOCKER]

polaris part number 1910411

[SweetSportsman]

Hey Eric you there? I sent you a pm the other day wondering if you got those parts sent out monday or not, I know you have been busy, but please let me know so I can expect them

[hakitall]

Hi there just wondering if you still have cdi?and if you know part #?

[torkmonster]

Do you still got the rear bearing carrier/housings??? The LEFT one????

["Bankrupt"]

Hi there just wondering if you still have cdi?and if you know part #?

The CDI is still there but i don't have the part #. I'll try and get that today.

And I believe both rear carriers are still there. I'll look today for those too.

[popomonster]

polaris700, i will take one of the rear carriers, let me know how much...

[hakitall]

Pretty sure it is the one was told today 02 to early 04 is the same part# next question is how much are you asking?also how about some type of express shipping? I'm located in niagara region not to far from rubberdown also looking for speed sensor and speedo cluster if you still have it? Thanks Jay

["Bankrupt"]

Speedo sensor yes, no speedo.

PM me a addy and I'll figure out shipping.

[Rubberdown]

Pretty sure it is the one was told today 02 to early 04 is the same part# next question is how much are you asking?also how about some type of express shipping? I'm located in niagara region not to far from rubberdown also looking for speed sensor and speedo cluster if you still have it? Thanks Jay

Do we know eachother? I have pics of me in that same spot as your avitar LOL....

Anyways, welcome to the forum....

Hey Eric, how bout the tank and gas cap :jaw:

["Bankrupt"]

Hey Eric, how bout the tank and gas cap :jaw:

Ummm.... errrrr....

Gas tank? :doh:

[hakitall]

we were tallking to you at caledonia show about wheel adapters from cat to polaris the 14" wheels were for sale at the show.Good old GM riding in the pic lol

[sfd_324]

Light switch?
Should be the same as my 02 400
How much?....I'm down here in Sylacauga.