3" Lift

[SouthernMudder]

Hey RubberDown,

The 3" lift that you make is only for the front correct? This will be for a 2006 Polaris Sportsman 500 EFI. Also is it a true 3" lift? I know the HL lift I have now is really only a 1.5" lift so I will gain an extra 1.5" of GC plus when I get the 29.5x10 laws will gain more GC. Or lookin at 27x12 laws. How durable is this lift? Any picture's? Thanks

[slapnuts8725]

I see a rubberdown lift out lasting the the bike! You wont find a nicer lift out there. :cool:

[Dirtbmw20]

Here's the "pretty" picture of the 3" lift and yes, it is a TRUE 3" lift. This is the picture that RD presents you with, it's layed out all nice, neat, and pretty on a nice soft fluffy white cloth,lol.
http://i66.photobucket.com/albums/h260/Dirtbmw20/100_3432.jpg

And then here's the REAL life pic, the real nitty gritty, with it sitting next to one of the "other guys" cheap 1 1/2" lifts. As you can clearly see, there is no comparison in quality. Like slapnuts said, it will outlast your bike. I'm doing it on stock axles, if I had Gorillas in the front like you, I'de jump on it in a heart beat. The other lift is made by Super Lifts.

http://i66.photobucket.com/albums/h260/Dirtbmw20/NewLiftvs.jpg

And here is a pic of it installed on the bike.

http://i66.photobucket.com/albums/h260/Dirtbmw20/RubberdownLift.jpg

[Rubberdown]

Thanks guys for the nice comments. Yes SouthernMudder, only the front can do to 3" and if you have gorilla's, as Lee stated, it shouldnt be a problem at all. The rear can only go to 1.5 as it just wont go down any farther.

I have a pair in plain aluminum finish sitting on the shelf, they are all yours if you want em.

Paul.

[SouthernMudder]

Here's the "pretty" picture of the 3" lift and yes, it is a TRUE 3" lift. This is the picture that RD presents you with, it's layed out all nice, neat, and pretty on a nice soft fluffy white cloth,lol.
http://i66.photobucket.com/albums/h260/Dirtbmw20/100_3432.jpg

And then here's the REAL life pic, the real nitty gritty, with it sitting next to one of the "other guys" cheap 1 1/2" lifts. As you can clearly see, there is no comparison in quality. Like slapnuts said, it will outlast your bike. I'm doing it on stock axles, if I had Gorillas in the front like you, I'de jump on it in a heart beat. The other lift is made by Super Lifts.

http://i66.photobucket.com/albums/h260/Dirtbmw20/NewLiftvs.jpg

And here is a pic of it installed on the bike.

http://i66.photobucket.com/albums/h260/Dirtbmw20/RubberdownLift.jpg

Awsome thanks Lee. Wow that looks very good!! The qualitly does look much better then the 1.5"-2" lift's I have seen. Ver nice.

[SouthernMudder]

Thanks guys for the nice comments. Yes SouthernMudder, only the front can do to 3" and if you have gorilla's, as Lee stated, it shouldnt be a problem at all. The rear can only go to 1.5 as it just wont go down any farther.

I have a pair in plain aluminum finish sitting on the shelf, they are all yours if you want em.

Paul.

So I can take the HL 2" lift off the front and put on your 3" lift and just leave the HL 2" in the rear? Do you have a picture RubberDown? Also a price? Thanks

[Rubberdown]

You mean can you take the HL 1.5" front lift off, YES and you could keep their rear on if you wanted to. I can sell you just a front kit, thats oaky with me. What did you want a picture of, the plain aluminum front or the rear kit?

Heres 2 different 3" front kits, one was custom engraved for a guy and the other was not.