PDA

View Full Version : Noise From Rear End .!


04.5700EFI
08-27-2007, 05:15 PM
When I Shake My 700EFI From Side To Side IT Makes A Clonking Noise On Both Sides In The Rear BY the tires,and They Shake A Bit.

"Bankrupt"
08-27-2007, 05:36 PM
wheel bearings.

jack the rear up where both tires are off the ground. then grab the tire on the top and bottom. push the top towards the bike while pulling the bottom away from the bike.

you will probably feel and see alot of movement... thats not good.

04.5700EFI
08-28-2007, 03:34 AM
Are They Hard To Change/ How Do U Change Them..and Is There A Cheaper Set Then Factory Thats Just As Good???? And Will Any Thing Get Messed Up Besides The Bearing,if U Ride ???thanks

"Bankrupt"
08-28-2007, 07:45 AM
yes and no. they can be really hard if you dont know what your doing or dont have any tools to work with. you can do each side in under 30 mins if you have help or have done it before.

look on ebay. the rears are about 2x what the front cost but anywhere sells them cheaper then what polaris charges.

and yes, you will start tearing up ALOT of stuff if you keep riding. first to go will be the brake rotor and caliper and after so long your going to more or less "weld" the bearing into the housing and you will have to replace the whole housing then.