Honda Rincon 680 Snorkel's

[MudWild680]

Guys & Gals


Looking for pictures of your honda Rincon's with a snorkel installed.
I just got done with mine a few hours ago.
It was my first one, and i did No research at all.

It turned out quite nice for what i did.
It has its weak spots that need to be gone over.
I still need to run all my breather lines to it.
When i get around to doing that, i'll have a new
snorkel set up in there.
Ive got enough flex hose and PVC pipe to do atleast 5 more bikes.
haha


So please
Post your pictures, installation pictures or pictures of how it is routed are also welcome and much needed!



Thanks a bunch guys!



Here's my set up at the moment.
I refuse to post any other pictures of it
I'll be too embarrassed im afraid. :ohwell:

http://i21.photobucket.com/albums/b265/ride_wake_210/ATVn%20It/Picture084.jpg
http://i21.photobucket.com/albums/b265/ride_wake_210/ATVn%20It/Picture085.jpg

[littlegrasshopper]

I posted some on HL for ya and I fixed your pics over there as well.

[850PoPo]

Ill round some of mine up just did it last week ! I ran a two pipe system for max air flow & besides I think it looks COOL having two up THERE

[MudWild680]

I posted some on HL for ya and I fixed your pics over there as well.


Yeah, i replied over there

Ill round some of mine up just did it last week ! I ran a two pipe system for max air flow & besides I think it looks COOL having two up THERE

ive seen your from the outside, would like to see some of it beneath the plastic

[850PoPo]

Got em at home on the PC be home shortly out Cell Phone hunting wife lost her's in grass thats about a foot deep it's gone think someones tire ate it !

[850PoPo]

Here is one of under the plastic http://i532.photobucket.com/albums/ee327/mattdtrue4/1223821133.jpg

[850PoPo]

Here is under seat http://http://i532.photobucket.com/albums/ee327/mattdtrue4/1223818411.jpg

[850PoPo]

And the one you probally seen http://http://i532.photobucket.com/albums/ee327/mattdtrue4/1223846804.jpg

[MudWild680]

Thanks!

That helped out quite a bit.
What type of hose is that?

Looks like sewer line for a RV or something

[850PoPo]

Yea its hose the use for hot tub's and swimming pool's went with it cause it fits perfect into 1 1/2 PVC you can even use the all purpose glue that hold's PVC togather.Come out the air box with 2 inch the used a reducer to go with 1 1/2 the rest of the way to rack's.Then rubber boot's to in sure no break in case of a roll over.The black hose is 1 1/2 also its from NAPA auto parts Good Year radator hose.

[MudWild680]

So i can find the white flexible hose you have pictured at the local pool and spa dealer?

[850PoPo]

Got mine at Lowe's

[MudWild680]

moved my snorkel to the right side after doing some serious chatting with another member.
I'll get some pictures up later.

Matt

do you have a pic of the right side of the tank where your hose is ran?

Thanks!

[850PoPo]

Hre you go this is the right side !!http://http://i532.photobucket.com/albums/ee327/mattdtrue4/1224977959.jpg

[850PoPo]

Well now that you have two holes might as well run a set up like mine. BTW why did you move yours to the right?

[MudWild680]

I now have 2 holes, but they are in 2 different spots.
One is behind the rack closer to my handle bars and the new on on the right side is inside that square in the rack, further forwards.

Moved it further forwards so i can raise the snorkel up a bit further.
Moved it because i had my hose running across the top of my exhaust pipe.

I didnt discover that i could run the hose on the left side the way i did on the right side(same as you)

So, either i buy a new fender to make both holes even, or just leave the hole on the left, put some white tape over it or something. Or re drill the hole on the left further forwards and run 2.

But here's the new set up-

http://i21.photobucket.com/albums/b265/ride_wake_210/ATVn%20It/Picture089.jpg

[850PoPo]

Hell yea thats tall !! Is that 2 inch pipe?

[njrincon]

on my 07 rincon i ran two snorks right from the box,one from the stock snorkel,and one from the lid,i cut 1 1\2 hole in the lid used a street 90 then cut a couplin in half and glued it on bottom(inside the airbox)ran two 1 2\2 flex pipes to the racks, then 2 inch abs from there.it made a big difference in throttle response with two

[850PoPo]

Post some pic's of it I would like to see them and how they are ran

[njrincon]

I'll get them tomorrow gotta charge camera

[850PoPo]

Awesome love to see how you did that might change mine at box

[MudWild680]

Yeah i would also like to see the set up

[torkmonster]

Yea, i would like to see it also!!

[850PoPo]

Didn't work post the link were we can find them you have photobucket

[850PoPo]

Better yet email them to me I'll post them for you mattdtrue4@yahoo.com

[njrincon]

having a little trouble

[850PoPo]

Took me forever to get it couldn't understand. Now when I post I just manual type the link in if I copy then paste it don't work it is easy with photobucket Torkmonster explained the method

[torkmonster]

Yeah, it's gotta be the IMG code, on matt's computer if he copy and paste it, it adds too many prefix on it... So he just types it in.... But yeah, the IMG code is the one you want to put in.

LOL I know that is not the best explanation, but I just woke up... lol need coffee or cola or something!

[850PoPo]

Beer maybe ? LOL

[torkmonster]

lol no... Not any beer this early...... Maybe later... Or some JIM there will be NICE!

[njrincon]

http://i387.photobucket.com/albums/oo319/njrincon/100_0940.jpg

[njrincon]

http://i387.photobucket.com/albums/oo319/njrincon/100_0941.jpg[/IMG]

[njrincon]

http://i387.photobucket.com/albums/oo319/njrincon/100_0943.jpg

[njrincon]

http://i387.photobucket.com/albums/oo319/njrincon/100_0944.jpg
FINALLY!!!

[850PoPo]

Thats one hell of a setup looks great !! Same hose I used stuff ain't cheap,could you tell any difference in the way it runs ???

[njrincon]

alot better throttle response than 1,should help alot with pipe and programmer

[MudWild680]

yeah it looks good.

Diggin the way youve got the pipes anchored to your rack.

[850PoPo]

I was thinking the same I was wondering how to steady mine up some more ! Now my problem is solved gonna go get me some U bolts Saturday. Thanks njrincon !!

[njrincon]

no problem,about $3.00 for the bolts,on the back side I criss-crossed the straps and a little lock-tite

[850PoPo]

When you remove your air box lid the hose will flex enough not to break seals? Did you use PVC glue

[torkmonster]

Looks great man...

[850PoPo]

Hey Tork gonna redo mine like this

[850PoPo]

At the air box that is

[torkmonster]

Hey Tork gonna redo mine like this

Are ya' matt??? Coo man. It does look good and is a true 2 you know? That is kinda what I was saying about the 2 into 1.. Your losing flow like that... it'll only flow as big as your SMALLEST point...

[850PoPo]

Yes that's right I'll get it the way I want it soon or later hardest part is done at least,up by the racks that is!

[torkmonster]

Yeah no doubt.. I think it is a good setup the way it is matt.. But yeah, the whole point is to do it the way YOU want it.... I messed up and went with what my dad thought best on the popo and you can see it is back stock *for now* lol He had a good idea, it just didnt work out!! and on that air hungry thing, I NEVER got the CARB right!!!

ok BACK TO TOPIC!!!

[njrincon]

on the air box side I used a street 90 going in and cut a couplin in half on bottom,pvc cleaner and glue , then rtv silicone around top and bottom @ fittings, plenty of flex to remove lid and clean filter, also rtv around lid gasket, pain in the
ass to get off but worth it alot of payments left lol

[njrincon]

almost forgot you gotta trim the seat pan a little too,Ifilled mine with shoo goo so the foam doesn't rot

[850PoPo]

Was wondering about seat fitting.Gonna work on my setup this weekend might even try to come in from side of airbox if there is room haven't looked yet

[850PoPo]

Well yesterday was to have some free time so i redone snorkel's at air bow so that achieved what i set out to do have dual's,true dual's here is a picture at airbox
http://i532.photobucket.com/albums/ee327/mattdtrue4/1225606371.jpg

[850PoPo]

Here is a top view
http://http://i532.photobucket.com/albums/ee327/mattdtrue4/1225606426.jpg

[850PoPo]

Here is a under the rear fender shot,that pipe shield cut the hell out of my knuckle ! http://http://i532.photobucket.com/albums/ee327/mattdtrue4/1225644162.jpg

[850PoPo]

Here is a larger picture http://http://i532.photobucket.com/albums/ee327/mattdtrue4/1225643102.jpg

[njrincon]

looks good brother , glad I could get your wheels spinninglol

[850PoPo]

LOL took more thought than actual labor,went of your ideal do thank you for the help!

[Kurmis]

Hi lads, I've got Rincon 680 and recently had a snorkel installed (custom made - not original). Engine runs nice on idle, but I feel loss of power on higher rev, especially going bacwards. Whats wrong? Too much air? Bore is about 8-9 centimetres.
Computer error?

[850PoPo]

How big are your snorkel

[Kurmis]

1.2 - 1.4 meter long and some 8cm diameter

[850PoPo]

Sorry what the inches

[badmaners]

80mm[8cm] Divided by 25.4= aprox 3.14 inches. Wow big tube! 1.4 meters is 1400mm divided by 25.4= aprox 55 inches.
Is that 8cm the outside or inside diameter?

[850PoPo]

No kidding a bit large. Try 2 inch maybe or put a reducer on what you got.I ran dual 1 1/2 inch tubes to box it works very well for me. It's total of 3 inch but I have more distance on my snorkels

[badmaners]

2 x 1 1/2 does not equal a 3 LOL.
1 1/2 area is 1313 sq mm.
So 2 x 1313 + 2626 sq mm.
3 inch area is 4769 sq mm.
As you can see the 3 inch is almost twice the area of 2pc 1 1/2 inchers .

Sorry about the metric LOL.
Of course it,s still dependant on outside or inside diameter. Ie: wall thickness etc.

[850PoPo]

WTF to much, that flew over my head. OMG let me try to read that couple more times! LOL

[badmaners]

WTF to much, that flew over my head. OMG let me try to read that couple more times! LOL

How about...2pc inch and a half pipes is almost half the area of one 3 inch pipe.

There was another Halloween thread that explains pi. Remember the 3.14 thingy

[froogle]

How about...2pc inch and a half pipes is almost half the area of one 3 inch pipe.

There was another Halloween thread that explains pi. Remember the 3.14 thingy

HOLLY CRAP! Stay off the PIPE!:hippie:

[850PoPo]

So by snorkel the way I'd have mine now what have I achieved that is 2. 1 1/2 ers

[badmaners]

yep 2 inch and a half pipes have alot less area [cross section] then a single 3 inch like Kurmis was asking back a page or 2. I think his has too much air but what do I know LOL. I just use a boat for water LOL.

[850PoPo]

So by snorkel the way I'd have mine now what have I achieved that is 2. 1 1/2 ers

So what have I achieved here by my setup with the two 1 1/2 pipes I have used

[850PoPo]

Oh I'm sorry for bothering you mine are seperated I now have two holes in my air box one for each pipe

[badmaners]

Like I said I don't do the snorkel thing but if your 2 pipes work for you then great. It's the other guys 8cm or 3 inch pipe that's the problem. Also have to take into accout the amount of bends and length of pipe. This all has an effect on CFM or cubic feet a minute that can pass down a pipe or tube. I think BigT can explain it better than myself. He's got the engineering degree. Actually I think he's posted on this subject before somewhere in here.
No bother at all LOL.

[850PoPo]

Wish BigT would chime in maybe he will see this !

[Kurmis]

8cm or 3 inch is the inside diameter. Thanks for advice, I will try to make it more narrow.

[850PoPo]

Think that would your problem too much air. What country you in by the way

[Kurmis]

Country Lithuania, borders to the Baltic sea.

[850PoPo]

That is too cool! Post some pictures of your bike or your riding area's we are picture whores on the site more pic's more happy

[torkmonster]

yeah we DO like pictures!!!

[Kurmis]

Hi, I've put some pictures into the gallery.

[Rubberdown]

Country Lithuania, borders to the Baltic sea.

Well, I have not sold a kit to anyone in your country "yet", so why not otder a lift for your Rincon or your Sportsman to broden my global sales ;)

Welcome to the forum, I hope you enjoy and spread the word to your friends to come by and visit us :)

[Rebel64]

Hi, I've put some pictures into the gallery.

Nice pics Kurmis!

[Kurmis]

Well, I have not sold a kit to anyone in your country "yet", so why not otder a lift for your Rincon or your Sportsman to broden my global sales ;)

Welcome to the forum, I hope you enjoy and spread the word to your friends to come by and visit us :)

can you also ship it?

[850PoPo]

Sure he can !!! Send him a message he will get back to you

[Rubberdown]

can you also ship it?

With an address, I can get you a shipping price. I have found that most of my shipments to over seas locations are around $40, but since my kit comes with domestic shipping included valued at around $10, I would only charge an additional $30 for the shipping to get it over seas to an international location....