29.5 swamp lites

[username]

thought id let you all you rzr guys know, that with paul lift 29.5 swamp lights fit without rub issues, and without spring spacers or floor work.

they look awesome too. hard to imagine the rzr without them now that they are there. ill report back after the weekend on speed/acceleration loss, and how it does in the mud, vs the 26 inch mud lite xtrs i had on there.

oh, yah... im sellin some barely used 26 inch mudlites if anyone is interested

only thing that sucks about swamp lites is they r only 9 inches wide... vs the 12 u get with the itp 30s... but ill take that loss to not have to cut my floor.

my buddy has 30 itps, had to customize floor, spring spacers, and lift, ill see if i can follow him this summer on the 29.5s


only concern now, is with the big tires, and the 1/2 inch uhmw skidplate my rzr might want to float? kind of curious whatll happen with that

[torkmonster]

We need some pics of it with the 29.5 swamp lites on it!!!

[username]

sure gimme a bit

[username]

nevermind my first post, sorry guys, rubs on the sway bar, 1.5 spacers needed in the front,

also need spacers in the back to miss motor mount on the right side,

rubs a bit on the floor in the front, where it squares off... nothing a heat gun, and a peice of plywood wont fix,, going to try and heat it up and pound the corner in.

but looks great, and a lot more clearance, ill post pics when my girlfriend shows me how to put them on here.

[username]

Ok, heatgun and a peice of 4x2" wood, parked the rzr downhill on an angle so the suspension bottomed out on either side, then took the wood and placed it between the swamplite and the floor (where it squares off) turned the wheel tight, then applied heat inside to the floor, put cold water on it, plastic is a bitch in the corners, has a mega memory,... but if you keep applying heat in the problem areas it forms a perfect space to clear the tires without cutting the floor...


very important u let it cool before moving the wood, or it mashes the plastic a bit and u lose the clean finish.


i buried it in a swamp, kind of pushed my limits, ill post pics when they get sent to me.