polaris fan on/off switch

[OnlyPolaris]

i am selling my fan on/off switch because i am relocating my rad and have no use for it. It allows you to turn your rad fan on manually. it will ight up when you do so. it also lights up when the fan comes on automatically. it is an easy three wire install. it also involves cutting a hole in your headlight pod but is easy because all you do is follow the outline on the back side. this switch is made by the same company that makes the stock polaris rear work light switch so it looks stock once put in the pod. i am asking $10.00 for it. here is the website that sells them.

http://www.quadovator.com/1618702.html

[Turk]

What are you going to use to fill the hole where the switch was??

I'll be installing my switch sometime this week.

[OnlyPolaris]

i bought new pod plastic from bigdog800efi. i needed the new plastic anyway because mine had a big crack in it. and i got a great deal on a used one in perfect condition. id you look in my pics i got it installed already.

[Turk]

Hope you dont me asking what you used to cut out the piece for the switch,It's such a small very small piece to cut out.The temp gauge is real easy because I can use a 1-1/2 hole saw but the switch being so small will take some percision.

[Bigdog800EFI]

exacto knife. make it to small and make small increases.

[Turk]

exacto knife. make it to small and make small increases.


Thanks thats what i'll use,yeah can always make it bigger but once it's to big there's no turning back.

[OnlyPolaris]

ya i just used an exacto nife. then if the hole need to be trimmed up a bit, i just use a file.

[OnlyPolaris]

come on someone has to want this quality product for there polaris. i dont want it to go to waste.

[Turk]

Hey guys thanks for the tip on the exacto knife it worked just fine,the plastic is really easy to cut.I got the reverse override switch in last night and working I love it.What was nice on my year/model is that on the inside of the pods plastic there was markings for for where to cut the hole for the switch so I mounted it above the work lights switch.

I'm going to start the temp gauge & the fan switch tonight,those i'm going to mount on the other side of the speedo.


come on someone has to want this quality product for there polaris. i dont want it to go to waste.

Yeah I would think someone here would be interested,it's a great mod and so simple to install,even cutting the plastic to mount the switch was simple.If I had'nt already had got mine I would've bought yours.

[Bigdog800EFI]

Make sure on the temp guage you cut the hole up high enough to clear the handle bars.

[OnlyPolaris]

sold

[Turk]

Make sure on the temp guage you cut the hole up high enough to clear the handle bars.


Will do,Greg from quadovator says to allow at least 1 1/2 inches of clearance for the lower part of the gauge that goes inside the pod.I'll take pictures whan all is installed and post em up in the polaris forum.