Any Updates on the King Quad lift RD???

[00Boss]

Like it says, any updates????

00

[Rubberdown]

Yup, the rear design is figured out, that was an easy one and I like what I have come up with, should have those parts made by Thursday and installed and tried out Thursday night.

The front on the other hand, not so sure yet, looks way WAY to tight up top and the bottom is a bit limiting on how to do it and you cant lift the front to much or you get CV bind (yes we watch out for that stuff ;) ) but I think I got it figured out.

Got my insulation on the walls done, and some of the vapor barrier is up, thats a bonus...for me at least LOL.

[CorrosionX]

Gotta keep warm in that new shop!

[dcfox]

Hey Paul...
Have you looked at the brackets under the floorboards of the King Quad 750?
How about designing a replacement bracket that eliminates9or moves) the bar across the back?
That sucker really limits the installation of taller tires...even with a lift.

[00Boss]

Binding up my new axel...............lol. I know the front is limited to 1.5" at the most. I've tried before, unbolting the top mount and jacking it up. How much did you get out of the back??? 1.5", or 2". And dcfox's idea about those foot rest is a good one, but you wont have time for that this week. Anyways keep me updated. Any pics?????

00

[Rubberdown]

No idea yet on the height gain in the rear until i get the parts made and installed, i had 3 different variations being made to get me the best possible scenario

[Rubberdown]

I will be installing the rear and playing with the front tonight, if you wanna come by any time after 7, come on by and check it out. We could even put it back to stock if I dont get the front finished up tonight and you can take it home tonight so you have it for the weekend. i can play with it more at a later date if you want? Let me know, # is 905-356-9181, call me and let me know if you are coming by or not ;)

[00Boss]

Ya, i may as well come see, got nothing else to do. I'll give ya a call in a bit.

00

[00Boss]

Well its looking very good. Now that i made you some room up front it should be a breeze. Cant wait untill its done, its gonna be sweet thats for sure.

00

[Rubberdown]

Front is figured out, just working on the smaller front part. Gonna put a few new shock placement holes in so I have a few options to work with. Hope my laser guy can squeeze me in tomorrow LOL.

[00Boss]

So....they powder coated yet? lol

00

[Rubberdown]

yes, yes they are, are you ready to install one now?

[00Boss]

i wouldnt mind bolting one up, and putting the EDLs on to see if i can clear a bucket lol, but may not run it all the time untill spring b/c of the technical trails i've been doing now.

00

[Rubberdown]

you wanna put one on this weekend in your heated garage? I could use the install pics and install notes to go with it?

[00Boss]

sure, im riding tommorrow and monday though....did you want to take the pics and notes or are you okay with me doing that? i can pick up the kit and do it when i have time? or whatever, doesnt matter to me. Gotta get the new EDL on a rim aswell.

00

[Rubberdown]

how about sunday then?

[00Boss]

Sundays swell. You can get all the pics and stuff for install done, but ill pop it back off for monday (just b/c i dont want to ride edls in the snow and do the washouts with a lift. Hell i roll it enough now at stock height.

00

[Rubberdown]

okay, PM me your # and well set up a time tomorrow.

[Ogeechee]

Do you think you may have these King Quad lifts available for the spring riding season? :nod:

[Rebel64]

This dude needs your help Paul!

http://www.facebook.com/photo.php?pid=1312498&id=1245655114#!/photo.php?pid=4201875&id=83261735635

[slanteye_z]

man whats the deal with the lift? id be very interested in seeing what people think and how much

[Rubberdown]

man whats the deal with the lift? id be very interested in seeing what people think and how much

Woops didnt see this one, sorry. We have 1 kit powder coated and ready to ship and more kits being made so let me know if you want one and we'll get you set up. So far so good, no complaints coming in yet but thats usually the case for us :clap2:

[slanteye_z]

paul you have a pm