Polaris prices

[MBRP ATV guy]

Here is our full list of Polaris prices.
http://rubberdowncustoms.ca/forum/attachment.php?attachmentid=2446&d=1267544024

[cletus600twin]

Any way to zoom it? I can't read it.

[hunterdan]

right click on picture, the press open link, then you should be able to zoom in

[ready2goriding]

Not bad at all! I'll be looking into these soon!

[BIG_T]

http://rubberdowncustoms.ca/forum/attachment.php?attachmentid=2446&d=1267544024

[x2rider]

NO X2??? Trust me When I ordered a GGB exhaust just prior to the merge I was told it would fit my machine. Well when it arrived the brackets were not far enough apart, or even at the correct angle to fit the '06 X2 500.

Not sure if they found an X2 to do some R&D on or not.

[MBRP ATV guy]

No sorry no X2 systems yet.

[stricker76]

Any system in the works for 08+ Sportsman 800? And any sound clips?

[MidnightX]

So,

I have a 500 Sportsman.

Whats quietier sport or preformance??

and how much extra to make the snorkels? stainless? or just regular steel.

Thanks

MidnightX

[MBRP ATV guy]

The sport would be the quieter of the two.
Our current performance line is on hold pending the launch of our new design.
We should still have some performance mufflers in stock if you want one.

Our mufflers are not designed to have a snorkel directly bolt up to it.
But it should not be a problem for the guys at the factory to come up with a nice clean set up for you. They do this kind of custom stuff all the time.
The sport muffler would be the easyest one to snorkel.

You can have your snorkel in either aluminized steel or stainless.
Do you want just the exhaust pipe or ones to do a full snorkel job?

The price would depend on the amount & type of material used & the number of bends required etc.

[wildhigh]

i'd rather have dyno results thats why i ordered the muzzys dual exhaust!:blabla:last time i talked to someone there they said you don't dyno your exhaust so how can you have a performance series?

[MBRP ATV guy]

We dyno every performance exhaust we design.

Once our new Performance mufflers are through the design stage & ready for production im sure we will have numbers available to post.

We dont sell just noise!

[stricker76]

i'd rather have dyno results thats why i ordered the muzzys dual exhaust!:blabla:last time i talked to someone there they said you don't dyno your exhaust so how can you have a performance series?

Thats ok, they don't like Rhinos anyhow. LOL

[MidnightX]

The sport would be the quieter of the two.
Our current performance line is on hold pending the launch of our new design.
We should still have some performance mufflers in stock if you want one.

Our mufflers are not designed to have a snorkel directly bolt up to it.
But it should not be a problem for the guys at the factory to come up with a nice clean set up for you. They do this kind of custom stuff all the time.
The sport muffler would be the easyest one to snorkel.

You can have your snorkel in either aluminized steel or stainless.
Do you want just the exhaust pipe or ones to do a full snorkel job?

The price would depend on the amount & type of material used & the number of bends required etc.



OKAY Its a start...

A sport muffler would be great. Snorkel in Stainless only. How my is now I have 1 1/2 inch elbow it comes out I would say about 4" and then a stack about 4ft long.

PM me or let me know

Midnight.

[x2rider]

NO X2??? Trust me When I ordered a GGB exhaust just prior to the merge I was told it would fit my machine. Well when it arrived the brackets were not far enough apart, or even at the correct angle to fit the '06 X2 500.

Not sure if they found an X2 to do some R&D on or not.

Boy the GGB can you sent me only needed to have the brackets in different spots. Too bad I don't own a welder!!! I'd buy a MBRP in a second, if they had one that fit the X2!!!!

[MBRP ATV guy]

OKAY Its a start...

A sport muffler would be great. Snorkel in Stainless only. How my is now I have 1 1/2 inch elbow it comes out I would say about 4" and then a stack about 4ft long.

PM me or let me know

Midnight.

I sent your request in today for a price quote.
Unfortunately im on vacation for the next week so I wont have an answer before the 12th.

[MBRP ATV guy]

Boy the GGB can you sent me only needed to have the brackets in different spots. Too bad I don't own a welder!!! I'd buy a MBRP in a second, if they had one that fit the X2!!!!

You have more patience than I do!!!
All i can say is that the X2 is on the list of bikes to do. When is something I dont have any control over. Sorry

[MidnightX]

I sent your request in today for a price quote.
Unfortunately im on vacation for the next week so I wont have an answer before the 12th.

Any update on this yet??

[MBRP ATV guy]

Any update on this yet??

PM sent.

[Caveman666]

Any date or plans for the 850 xp options?

[MBRP ATV guy]

By early spring all our new ATV systems should be available.

Due to the volume of new automotive & sled designs we were working on this year the hard decision to postpone the ATV line until later in the year was made.
We are now working hard to make up for lost time.

[English]

Is the price list still current?

[MBRP ATV guy]

Yes the posted prices are still accurate.

[LooseScrew]

Have you guys done one for a 2011 Sportsman 500 HO yet?

[MBRP ATV guy]

Looks like the one we have should fit just fine.