Actic Cat Rear Diff Covers are READY!!!!

[Rubberdown]

Well....sort of. I hope to get Al's machine here this week to install his cover to make 110% sure everything installs perfectly. Here are some pics to hold you off in the mean time.

As I had told you, there were going to be some improvments over the last covers made, well, heres what we came up with.

The inner face that keeps the gear in place (done with that little thrust bolt on the stock cover) has oil grooved machined all around the face in order to increase lubrication between this face and the face of the drive gear. A large radius groove is milled into this cover as well to also increase oil volume and flow of lubrication. A small section is milled out on the inner face at the inside of the fill hole to make it easier to fill with oil, as well as a milled groove to better allow oil access to the fill check hole.

We think this is going to be a great addition to the Cat products we currently offer (2" lift kits, Axle spacer kits, Wheel Spacers, Spring Spacers Swamp Lox race wheels, shifter knobs, and coming soon, a Rad kit for the T-Cat and possibly even bumper plugs.

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/RDCDiff-7.jpg

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/RDCDiff-4.jpg

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/RDCDiff-5.jpg

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/RDCDiff-6.jpg

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/RDCDiff-8.jpg

[stricker76]

Looks good!

[Savageman69]

DAMN!!!!! Amazing job paul wow....I can`t wait to get mine.

[Presidentail Grizz]

Freakin Awesome BLING BLING BLING....:drum: bumper plugs:high5::high5:

[racer37l]

WOW, that looks good enough to frame and hang on the wall(purty)!!!

[BirdDog4x4]

Looks freakin awesome Paul

[Bad Kitty]

Looks great Captain. Guess I better get down there, now the onus is on me. Thanks Lol

[localfiremedic]

Keep us informed and how much price might be. looking good

[86buickgn]

looks dang good!

[Rubberdown]

Keep us informed and how much price might be. looking good


I was thinking $229 SHIPPING INCLUDED. I heard the other ones were $250, this cover has a lot more involved in the manufacturing with the improvements and extra op's required to get it all done. My initial retail goal was going to be $250 plus shipping to try and match the previous ones that were on the market but I can afford to cut that cost and add the shipping as part of the deal. AND free RDC stickers in the box LOL. Shipping with the USPS Flat rate box and delivery confirmation/tracking and insured is about $14 so in reality, the price of the cover is only $215.

[Bad Kitty]

Good business sense. The fronts are gunna be pricey.

[Rubberdown]

The front still has to be taken off your spare front diff. With the added front wheel drive components, it will require more 3-D machining if I think its even possible.

[quik660]

Got money in hand waiting! They gonna come raw aluminum like that? Or powder coated? Im ready whenever u are brutha.......tell ya what. Easiest way to get ahold of me is thru email......can reach me at: quik660@gmail.com and let me know when u ready for money.....

[plowboy]

looks good. Just let me know ..when .. where and how you want payment.

[Rubberdown]

They will be coming just as you see this one.

[MUDPROTN]

Thats nice right there!!

[localfiremedic]

Same as everybody else mentioned above. Let me know when they're ready and where I need to send the money

[Savageman69]

Hey paul any chance i can get one with the fill plug on the right side? My 700 efi rear diff is a one of a kind and its upside down in the frame, if not its not a big deal this will still work i believe.

[Bad Kitty]

Is it like a prowler diff Mark? They're flipped upside down.

[Savageman69]

Yah i think so.... Its the same cover...if you take the very first picture and move the fill and check plug over to the right side thats what mine looks like. Its not a huge deal breaker for me i can use the one above just would be harder to get to the fill plug thats all.

[Bad Kitty]

Ah, only hurts for a little while.Lol

[Savageman69]

Yah lol thats why its not a big deal just thought id ask lol.

[Rubberdown]

Here it is all loaded up and installed on a diff with 4.0's in it.

Using a heat gun on the bearing location while leaving the bearing in the freezer for a little bit made the bearing almost drop right in with no effort at all. Had I been able to set it down perfectly square, it would have dropped right to the bottom. I did use the quill on my milling machine to square it up and press it in with almost no effort at all.

The seal was like any seal, while the cover was still warm, I was able yo press it in place by hand with a bit of force, so it feels like a perfect fit.

The overflow fitting was a bit more difficult, for this I used some heat around the hole and put the fitting in the freezer. I used a set of vise grips on the fitting right above that little lip with the vise grips as loose as possible to barely have a hold of it. I used the mill to press this in as well with the handle of the vise grips set down on something the same level as the fitting and pressed down on the middle of the vise grips, this kept it pretty square and it pressed in with a fair bit of effort. Pressed it in until the little lip bottomed on the cover. I hope that makes sense LOL.

anyways, here's the cover ready to go.

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/RDCDiff-9.jpg

[Rubberdown]

Hey paul any chance i can get one with the fill plug on the right side? My 700 efi rear diff is a one of a kind and its upside down in the frame, if not its not a big deal this will still work i believe.

Sorry dude, my next run of covers likely wont be till I see some interest for them after these 10 are sold. That said, the hole location of the fill plug and check hole might not just be moved over, the entire hole pattern may also be different....

[86buickgn]

are you gonna send the diff covers with or without the overflow tube?

Just curious if this is something I will have to install once I receive the cover.

[Savageman69]

alright not a big deal paul ill just take one of these

[Rubberdown]

are you gonna send the diff covers with or without the overflow tube?

Just curious if this is something I will have to install once I receive the cover.

It will be shipped as just a cover alone. I was reading the "other" forum and see where some people are concerned with installing it. I looked on a Arctic Cat parts list and they retail for around $46 plus tax (13% here...OUCH eh) IF this is something people really need installed, I guess I can make a tool to press them in much easier, it wouldnt take too long to whip one up and press it in straight from the top.

[86buickgn]

It will be shipped as just a cover alone. I was reading the "other" forum and see where some people are concerned with installing it. I looked on a Arctic Cat parts list and they retail for around $46 plus tax (13% here...OUCH eh) IF this is something people really need installed, I guess I can make a tool to press them in much easier, it wouldnt take too long to whip one up and press it in straight from the top.

do you think the tool would be cheaper to sell than the cost of the part from AC and the labor of doing it for us?

[Rubberdown]

hmmmm, thats a good question, with the tool I have pictured in my big bald head right now, if I made it out of aluminum, it would be quick to machine, if I made it with steel, it would take a lot longer to turn it and mill it, either way though, the end user would still need a way to press it in like a wheel bearing. You know what I mean?

[86buickgn]

Yeah, but "most" people have a press or access to a press.

I am no expert, but I think selling the tool would work out a lot better to those of us who dont wanny try to tackle "afro-engineering" something to work on a product that looks as good as your side covers.

To be honest with ya, I am gonna wait and see what local, quik, and some of the others come up with on installing that tube before I buy my cover. It may very well be an easy deal, but I am gonna wait and see.

I have yet to try and remove my tube and re-insert it. i have no idea what kind of task it will be, but my presumptions is that its gonna be tricky to get the tube properly seated to ensure a good seal.

have you given any thought to threading that hole and we screw a fitting in?

[Rubberdown]

I dont want to use a threaded fitting because it will be a part that sticks straight out the side and likely be made out of brass and I would be concerned it would either A.) be too long out to the side and get in the way, or B.) break off easily if it is a thin walled brass fitting. The stock fitting is steel and it feels pretty strong.

I DID draw up a little tool in my CAD tonight and will likely have some made this week, at the very least I'll make up 1 prototype tool and see how well it works. IF I go the tool route, I'm betting I can have it made for around $12 to $14, its a quick lathe op and then a slot milled into the part with a ball nose endmill. It will still help to put a little heat around the hole and freeze the fitting, this is how I do ALL of my bearings and have always done them this way, makes a "pain in the ass" job a very quick and EASY job ;)

[86buickgn]

That seems fair enough. I also understand what you are saying about the issues with a threaded fitting.

Just outta curiousity, do you use Solidworks for your CAD design work?

EDIT: I meant to tell ya that I was the guy emailing you from the "navy" yahoo account a last week. I didn't want you to think i was some "fly-by-night" consumer.....I bleed MUD!

[quik660]

how hard is it to get the fitting out of our current side covers????

[Rubberdown]

quik, it was easy, a little heat around the hole and I broke it loose with a little wrench, then it just wiggled all the way out.

86, ya I know who you are now.

[MUDPROTN]

i got mine out with a pair of vise grips while holding the side cover in the other hand. Just took a little wiggle.

[quik660]

Cool....now im not so worried. aint nothin a lil MAP gas torch wont heat i reckon......lol COME ON paulie, let me give you my money!!!! lol (stomping round like a 3yr old) lmao

[Bad Kitty]

Quik U sound just like me,Lol. We'll have it on the bike tonite bro. Any more pics of your bike? Show these lads what a real bike looks like.Lol It's saweeet, fo sho.

[Rubberdown]

Al, I gotta go bend up about 20 rad kits, yours is in there as well so I should be home around 5-5:30, come on over around 6 and we'll start tearin into her.Hope its easy pulling the axle out????
You got oil to put back in the diff?

I hear ya quik, I'm tryin, I shoulda started this project a long time ago when Al started buggin the shit outta me LOL.

[quik660]

lol.....i understand. cant wait man!!!

[quik660]

http://i689.photobucket.com/albums/vv257/quik660/2011-01-09_17-46-36_339.jpg

All I got at the moment......I should have some more this wknd. It ought to be back 100%.











Minus my RDC side cover............lol

[stricker76]

Killer lookin cat! Where ya from?

[quik660]

oh dang....guess i need to add that to my sig huh????

Mcdonough, Ga

[Bad Kitty]

Good thing U got those Monkey axles, dem tires looook huge. Bet they work good though.

[quik660]

http://i689.photobucket.com/albums/vv257/quik660/2011-01-18_13-51-05_691.jpg

Just took a new one

[Bad Kitty]

I likey man. R U doin the bumpers blue as well?

[stricker76]

Wow. That thing looks sweet! How ya like them terminators? What'd ya run before that?

[hampster_rancher]

http://i689.photobucket.com/albums/vv257/quik660/2011-01-18_13-51-05_691.jpg

Just took a new one

That thing looks AWESOME!!!!

[quik660]

i had 31x11 laws on douglas diablos before....

http://i689.photobucket.com/albums/vv257/quik660/2010-10-30_15-24-31_298.jpg

thats what it looked like 3mnths ago

[stricker76]

Looks better now! Have to let us know how you like the terminators once ya get some miles on.

[quik660]

oh for sure.....so far with the lil bit of riding ive done, they seem like they are gonna be decent. i havent got em in any mud or water yet....but thatll change soon. got a ride planned the first wknd of Feb so.....we'll see.

[quik660]

naw Al....imma leave the bumpers blk. my floorboad supports and cleats are powdered blue to match the lift and stickers. didnt wanna do too much blue....

[Bad Kitty]

Good call. U know when to say enough.

[Presidentail Grizz]

WELL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Been 2 hrs......since yall started should have pics by now........:pop2:

[Rubberdown]

They didn't get started until 7:30. Paul was busy bending rad kits. They are out there in the shop working on Al bike.

[localfiremedic]

Just send me a pm when they're ready to be paid for and shipped. I don't wanna lose mine to another customer, lol

Or send me an email to get ahold of me fastest: carpeonnel@gmail.com

[quik660]

Local u have the same idea I have......I got cash burning a hole in my pocket now! Can I pre pay? Lol

[localfiremedic]

yeah I kinda do. Just wanna make sure I don't miss out on one of these covers, lol

[English]

They didn't get started until 7:30. Paul was busy bending rad kits. They are out there in the shop working on Al bike.

come on Melissa...you know there working on the beer fridge...LMAO

[Rubberdown]

Here you go, fits like a glove guys! The stock cover just barely touched the bottom frame rail with one of the ears, our kit might touch it by a couple thou (thickness of a hair or piece of paper). Our cover is thicker on the ears and entire mating face, but the amount of overhang on our cover is a slight bit less, therefore it seems it will fit in this tight spot just as good or better than the stock cover.

Also, to remove the stock cover and install this one, we had to remove one of the diff mounting bolts, the one closest to the front of the machine, then with a little pressure, we pushed it up enough to remove and install the new one. Very VERY simple procedure actually.

Okay, heres the pics....

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/P1183793.jpg

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/P1183790.jpg

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/P1183788.jpg

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/P1183792.jpg

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/P1183782.jpg

[Bad Kitty]

Hey guys, would have been done a couple hours earlier but this Al guy showed up.Lol He NEVER shuts up.
One saweet cover guys. Like Paulie says, fits like a glove. BETTER than the stocker, has more clearance. U will definately be happy with this product. RDC=FTW!:canada:

[localfiremedic]

good to hear. do you have them packaged up yet, lol

[English]

looks awesome...nice job paul...and Al...u could of washed the kitty..LMAO...and i sooo saw beer in first pic!!!

Is that on the T cat al?

[Rubberdown]

LOL, not just yet.

I will try and make that little tool for pressing in the vent tube tomorrow and test it out on one of these covers here.

You can call in your order during the day, IF you get the machine, leave your name, number and user name and what you are calling about and Melissa will call you back to get your info for your order.

905-356-9181

Paul.

[Bad Kitty]

Yes sir Andrew. Tis the Beater Cat. Wash it???? Man I was in the rain for an hour, then went to the car was and spent 15 bucks. That smelly damn sheeet from "Wilds Hole" was still caked in there. No brakes or suspension. The smell froze there. Geeeez.hahaha

[English]

LMFAO...looks good al..can't wait to see the Tcat back this way to get that pretty diff cover durty !!!

[Bad Kitty]

Al be back buddy. I had a great time meeting U guys, and the ride was fantastic. Next time I'll be more mobile. Not sure what bike I'll be ridden???

[quik660]

Im callin in my order tomorrow!

[localfiremedic]

haha. Got rid of this money now, lol

[850XPEPS]

Nice taunting us with the Beer Cozie again Paul and lookin good Al!

[Rubberdown]

All Diff Covers WILL ship with a Beer KOOZIE!!!!

[stricker76]

Shit, so i gotta order a cover to get a koozie?

[English]

Shit, so i gotta order a cover to get a koozie?

gotta order a cat to put it on too...damm...

wait till phil finds out...and we thaught he was bad about his stickers!!!


LOL

[Bad Kitty]

gotta order a cat to put it on too...damm...

Wait till phil finds out...and we thaught he was bad about his stickers!!!


Lol

lmao.

[850XPEPS]

Okay so what is the next contest to do with everyone Bi*&^$ng about getting Koozies?

[quik660]

ORDERED!!!!! dang 3rd shift!! jus woke up!!

[localfiremedic]

All Diff Covers WILL ship with a Beer KOOZIE!!!!

Sounds good to me. I can always use a Koozie

[Bad Kitty]

When installing this cover, make sure U point the vent tube towards the front of the bike. We thought it MAY kink the hose if straight up. The tool Pauls making for this will help out with that as well.

[quik660]

think i may just tap and thread in a brass fitting......imma have to check it out. whats the ID of the vent tube??

[Bad Kitty]

Not sure on ID. Not sure on threaded fitting either. Once U get it, then make the decision man. Not a big deal at all. Like the Captain said, it was just what he thought of doing, so he did it. A little heat and a few minutes in the freezer is all it took. Cheaper to.Lol

[Rubberdown]

Hey Brad, the piece will be a piece-O-Cake to install with this little tool. Add your time to drill and tap the hole to whatever pipe size you choose, the time it takes to find said pipe tap, picking up a fitting and getting it to seal perfect, or just pulling out the stock fitting, heating a bit and pressing in the correct fitting with this little tool that will not cost more than $15..... its your cover, you can do it however you want ;)

[quik660]

i'll check and see......figure if ive done everything myself so far......a lil ole vent tube aint gonna whoop me...

[86buickgn]

Well, I am ready to order my cover. Just called and got the "machine". LOL!

I also just ordered a new differential, a complete one!

There shouldn't be any issues now......brand new diff and a stronger side cover!

Ready to give it hell!

[Atomic_Sportsman]

Well, I am ready to order my cover. Just called and got the "machine". LOL!

I also just ordered a new differential, a complete one!

There shouldn't be any issues now......brand new diff and a stronger side cover!

Ready to give it hell!

You can not post in this forum any more until we see pics of the grand national. :bolt:

[quik660]

he got a nice one........GN that is.....

[86buickgn]

You can not post in this forum any more until we see pics of the grand national. :bolt:
http://i39.photobucket.com/albums/e159/86buickgn/100_2327.jpg
86 and 85. Traded the 85 for a Neon SRT4.

http://i39.photobucket.com/albums/e159/86buickgn/7bc2565d.jpg
http://i39.photobucket.com/albums/e159/86buickgn/edfbbc93.jpg
http://i39.photobucket.com/albums/e159/86buickgn/4406911d.jpg

[86buickgn]

http://i39.photobucket.com/albums/e159/86buickgn/100_07751.jpg

[86buickgn]

anyone have any idea if there are any side covers left? I sure as hell hope so. I been waiting since Halloween weekend to put this diff back together!

[stricker76]

Nice!!

[stricker76]

anyone have any idea if there are any side covers left? I sure as hell hope so. I been waiting since Halloween weekend to put this diff back together!

1.) Bad Kitty Installed
2.) plowboy
3.) plowboy
4.) 1badkittycat
5.) Savageman69
6.) Quik660 PAID

7.) Notso42
8.) Presidentail Grizz
9.) localfiremedic PAID

10.) vamped450 PAID

11.) Clint PAID


Well, i think Paul said he only made 10, and looking at this it looks like 5 are sold, and the rest may be spoken for?!? Maybe someone would be willing to grab one on the next run?

[86buickgn]

well aint that some shit ^^^^^.

Anyone know how long its gonna be before the next "run" of covers are gonna be ready?

[stricker76]

Think Paul said he would see how these sold first. If he sells all 10 this quickly, i'm sure he will make more soon.

[86buickgn]

can you define soon? Not trying to be a butthead, just curious if I need to move the MP aside and work on some other projects.

[stricker76]

Sorry, i'm just guessing here. Don't know how much Paul has on the go right now, so not sure exactly how soon he plans on making more. I'm sure he will chime in here shortly.

[quik660]

Tony.......need to put THE PRIDE tag up on ur sig......

[86buickgn]

^^^^ DONE DEAL! I am watchin Barrett-Jackson and forgot all about it! LOL

Makes me wish I was in Arizona right now, they are givin cars away!

[Rubberdown]

Heres a little video of the tool I made to make this vent tube a breeze to install, sorry I didnt have the full camera crew here, just me and my camera....not even a make up person to get me ready for the shoot!!!!

http://i79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/th_toolvideo.jpg (http://s79.photobucket.com/albums/j158/rubberdown/Arctic%20cat%20Diff%20Covers/?action=view&current=toolvideo.mp4)

[quik660]

looks good paul!!!

[mud_33]

lol the pain in the ass overflow fiting tool lol that is awsome best name for a tool ever :)

[Savageman69]

ill be calling to pay for mine tomorrow

[quik660]

man waiting on this cover is like waiting for Xmas.....lol

[Savageman69]

Hey quik you can have mine...some major crap came up and I really don't need one until spring anyway so if your waiting go ahead

[86buickgn]

Hey quik you can have mine...some major crap came up and I really don't need one until spring anyway so if your waiting go ahead

I WILL TAKE IT!!! Have you paid for it already? If not, PM Paulie and let him know that I want yours.

[Rubberdown]

I WILL TAKE IT!!! Have you paid for it already? If not, PM Paulie and let him know that I want yours.

I have a PM out to savage asking if he wants to put his off for now, was gonna get ahold of you but I thought you sold or might have sold the MP? Let me know if you still want his cover and if he dont need it right now, its all yours.

[Savageman69]

Go ahead 86...i havent paid major car bill just came up so i need to pass right now. I will be buying one next round tho, i was gonna wait till spring to install it anway so im not to worried.

[86buickgn]

10-4. Whether I sell the MP or not, I want the cover.

I still have another bike that may get 4.0's and I will also be in the market for another project build even if I sell the MP.

[wildcatkit52]

Subscribing!

[quik660]

Im assuming the covers shipped out today? Any tracking number by chance?

[86buickgn]

yeah, I'd like to know when to expect mine as well if its not too much to ask. Need to make sure the Prowler is finished so I can move it outta the way and get the MP back on the trails.

[Rubberdown]

They were dropped off at the courier/broker at 8am thismorning, all pre-paid, I'll see if I can track down your tracking #'s in a few minutes and PM them to you.

Either one of you 2 guys talk to Notso42 or 1badkittycat? Just wondering if they still want their covers or not, if not, I have a couple people waiting on them....just wondering if you guys DO chat it up with them at all, thats all.

[plowboy]

got them today........they look great ...... excellent workmanship .......Thanks Paul

[localfiremedic]

still haven't got a tracking number or anything for mine????

Seems everybody has got there cover today but me. Paul you send mine out?

[Rubberdown]

still haven't got a tracking number or anything for mine????

Seems everybody has got there cover today but me. Paul you send mine out?


Tracking# is in your PMs

[localfiremedic]

got it man. Was worried it got delivered to the wrong address

[86buickgn]

just tracked mine. latest update was that it was in Rochester, NY on Jan, 25.

[Rubberdown]

tracking #'s blow LOL, half the time things are delivered before they show them even in the system yet. Hope it shows up tomorrow for you.

[86buickgn]

tracking # shows it was delivered this morning. Cant wait to get home and see it!

[wildcatkit52]

Anybody got an update on their new shiny parts?

[stricker76]

Not sure if anyone has installed one yet other than Al, but....

http://www.rubberdowncustoms.ca/forum/showthread.php?t=9464

[Bad Kitty]

Anybody got an update on their new shiny parts?

Quik showed a pic of a fifty foot twin blackie. Did U see that one. He likes it.hehe

[stricker76]

Huh? Wheres this pic?

[Bad Kitty]

It's in the AC pic thread that was started. It's nice, 32 terms.

[86buickgn]

http://i39.photobucket.com/albums/e159/86buickgn/4%20Wheeler%20pix/sidecover.jpg

Superb product! I recommend this even if you dont have 4.0 gears! I know it isnt bolted down here and the vent tube isnt installed, I was just workin on shimming my gears.

[Bad Kitty]

http://i39.photobucket.com/albums/e159/86buickgn/4%20Wheeler%20pix/sidecover.jpg

Superb product! I recommend this even if you dont have 4.0 gears! I know it isnt bolted down here and the vent tube isnt installed, I was just workin on shimming my gears.

U have that baby packed with grease do ya? Kinda looks like some red n tacky I C there. Sweet cover fo sho eh?

[86buickgn]

^^^actually, I rubbed a very thin film of red n tacky on the bore of the cover to "lubricate" the insertion of the bearing. That just goes to show how precise this cover is: it pushed all the grease down.

[800Stealth]

Gonna be a shame to hide that great looking cover with a bunch of mud lol.

[Bad Kitty]

Gonna be a shame to hide that great looking cover with a bunch of mud lol.

Thats true man but with the piece of mind that we'll get, there's gunna be a sheeeet load of mud that'll be slung everywhere. WHEN the front covers get done, and the NEW Cat axles. R beaters are gunna be near bulletproof for drivetrain. At least we'll have a big relief for sure. A/C=FTW!!!!!!:)

[800Stealth]

I hear ya, just saying it looks to nice to cover up. Oh and if your drivetrain is bullit proof, then your not making enough power LOL.

[Bad Kitty]

I hear ya, just saying it looks to nice to cover up. Oh and if your drivetrain is bullit proof, then your not making enough power LOL.

AH hahahahahaah. Can ya send me some of what yer smokin. PLEASE. hahahaha Jk

[800Stealth]

LMAO, might be tough getting the package through customs...

[Bad Kitty]

Borders ruin all the fun eh? haha

[badmaners]

Ya could swim lmao. It's not that far across the river...
[img]http://farm4.static.flickr.com/3487/3228756506_ed545658c3.jpg (http://www.flickr.com/photos/badmaners/3228756506/)
Niagara falls 001 (http://www.flickr.com/photos/badmaners/3228756506/) by badmaners696969 (http://www.flickr.com/people/badmaners/), on Flickr[img/]

[Bad Kitty]

And warm. Look at that, giant staembath. FK that sheeet. Buurrrrrrr! Nice pic Rob, got a shiver looking at it though. Guess U want some of dem darr goodies as well eh? haha
We'll get him up here for the RDC ride.

[badmaners]

lol, nah I have my own stock. Bunch of us were talkin about the same thing. This year we don't have borders to worry about.

[quik660]

http://i689.photobucket.com/albums/vv257/quik660/2011-02-08_14-35-18_54.jpg

here is the pic you speak of Al


http://i689.photobucket.com/albums/vv257/quik660/2011-01-30_13-01-27_350.jpg

[Bad Kitty]

lol, nah I have my own stock. Bunch of us were talkin about the same thing. This year we don't have borders to worry about.

There ya go. Buddy Lol

Thats nice Quik, Fits nice eh? When U have know worries thats what a TCat can do. With 32s. Ye ha. Good job man.

[86buickgn]

I put about 30 miles on the MudPro this weekend. I never made any high speed runs, but I did creep over some rough terrain, off camber situations, and some water.

What a piece of mind I had knowing this side cover was installed! I guess it goes without saying: I had no issues what so ever. No fluids leaked out, no water got in and all my gears are still rotating as they should!

[wildcatkit52]

Got mine... Gotta get it put in. Might change my gears to 3.40 while I am at it. Now you are doing front covers too? Hmmmm...
http://img.photobucket.com/albums/v325/wildcatkit52/ATV/IMG_0915.jpg

[wildcatkit52]

All Diff Covers WILL ship with a Beer KOOZIE!!!!

Oh yeah... I call BS on this post!

:nono:

Does this mean I get a front diff cover for half price?

[Bad Kitty]

Oh yeah... I call BS on this post!

:nono:

Does this mean I get a front diff cover for half price?

Hey bro, that is one beauty 66 buick U have.

[Rubberdown]

Oh yeah... I call BS on this post!

:nono:

Does this mean I get a front diff cover for half price?

I will get one out to you this week. Sorry

Melissa

[MUDPROTN]

Once uncle sam gives me back that jack for my taxes im gonna order one. hopefully that will be next friday.

[wildcatkit52]

Hey bro, that is one beauty 66 buick U have.

Thanks! It is highly likely I was conceived in that Buick...

[wildcatkit52]

I will get one out to you this week. Sorry

Melissa

That's okay... I am happy it had the cover in the box! If I'm lucky I'll get another box soon with a front cover!

[Rubberdown]

Now you are doing front covers too? Hmmmm...

I'm makin 15 more rear ATV covers and 5 rear Prowler 1000 diff covers now, once they are ready, I'll take the front diff cover I have to my programmer and see what we can come up with.

[Bad Kitty]

[QUOTE=Rubberdown; I'll take the front diff cover I have to my programmer .[/QUOTE]

NO NO NO Cap'n, U'll take the cable lok first right??? Buddy. Lol

[Bad Kitty]

Thanks! It is highly likely I was conceived in that Buick...

That makes it all that nicer man. Buicks rock.

[MUDPROTN]

Just payed for my cover a few minutes ago. Now im impatiently waiting for the fronts for electric diff lock to come out.

[wildcatkit52]

I will get one out to you this week. Sorry

Melissa

Got it in the mail the other day. I'll make sure and put it to use at Mud Nats!

I'll test the diff cover too! Should be putting it on this coming week. Looks like gear change is gonna have to wait. Stock ratio ain't that bad with 27's though.

[MUDPROTN]

Tracking number says mine is out for delivery. I work within a half mile from the post office but it was already on the truck before i got a tracking number.

[wildcatkit52]

Mine should be on the TCat this week or next week.

With getting myself and others ready for mud nats, AND working around riding, I have to find the time to fit it in the schedule.

Going to finally get the SLD taken care of at the same time. Burp bottle relocation and mod are going to be finished up tomorrow.

[boostedagain]

http://i12.photobucket.com/albums/a234/BoostedAgain/AC650h1/SSPX0004.jpg
http://i12.photobucket.com/albums/a234/BoostedAgain/AC650h1/SSPX0003.jpg

carnage from this weekend, buddy ordered us 2 today!

[stricker76]

Ouch!

[Bad Kitty]

Well Boosted, U will be happy soon. These covers are great. As I said to ya before, they fit better than the stockers. Piece of mind and good looks.

[racer37l]

Welcome to the insanity,Boostedagain!!!!!!! Sorry 'bout the bad luck.

[stricker76]

Oh yeah, welcome to the forum! Any pics of the beast that busted the cover?

[boostedagain]

ive posted it the a/c section...