help

[bin muddin]

How do you get the front axles out of the front diff? I have it all apart and tryed pulling like a mother pucker but no go! Also once the axles are out does the front drive shaft need any tricks to get it out of diff? Thx

[stricker76]

What are ya working on? Axles can be a pain. Best way i have found is one of Pauls tricks. Wrap a tie strap arount the cup right near the diff and tie the other end to the biggest sledgehammer you can find. A few swings will usually pop em out. As for thhe driveshaft, some have a roll pin and some don't. Might have to unbolt the diff so you have room to pull the shaft off, but again, depends what your working on.

[bin muddin]

My awd drive isn't working,sometimes it does sometimes it doesn't. I think the cage is toast ,i have a oil leak so i'll take it all apart and put new seals in while i'm in there.

[BIG_T]

It would help if we knew what type of machine you're working on. Ranger, RZR, Prowler, Rhino?

[bin muddin]

It would help if we knew what type of machine you're working on. Ranger, RZR, Prowler, Rhino?

lol sorry i didn't even realize that i didn't put that info in there. It's a 08 rzr

[bin muddin]

OK first i want to thank rubberdown. The sledge hammer method worked like a charm! I have the diff out and apart ,i can't believe the sludge in there no wonder it didn't work. Should i change all the seals while i have it apart? Is it normal to have sludge in there, do they all leak? I bought this used and i'm slowly fixing it up. Thanks

[bin muddin]

l
Looks like i need a few parts for the front diff. Does anyone know where i can get parts cheaper? Thanks