Rubberdown
02-26-2011, 10:26 AM
Parts included in this kit
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/parts-list.jpg
Installing the Front Lift Kit
-Jack up the front of the ATV and remove both front tires so you have more room to work.
-Remove the top shock mounting bolts and pull the top end of the shock outward away from the frame.
Slide Part # 1 all the way across in front of the frame cross channel as pictured.
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/P5112658.jpg
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/IMG_1898.jpg
-Place part # 2 and the appropriate aluminum spacer inside the frame channel together and install one of the 10mm bolts to secure the parts in place, do this on BOTH sides but do not tighten the nuts all the way just yet.
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/IMG_1894.jpg
-Install the top of the shock into its new mounting location with a 10mm bolt as pictured. As you can see, one bolt goes one direction, and one bolt goes the other direction, this was due to a clearance issue getting the bolts in place.
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/P5112659.jpg
-Put the tires back on and the front is finished!
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/parts-list.jpg
Installing the Front Lift Kit
-Jack up the front of the ATV and remove both front tires so you have more room to work.
-Remove the top shock mounting bolts and pull the top end of the shock outward away from the frame.
Slide Part # 1 all the way across in front of the frame cross channel as pictured.
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/P5112658.jpg
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/IMG_1898.jpg
-Place part # 2 and the appropriate aluminum spacer inside the frame channel together and install one of the 10mm bolts to secure the parts in place, do this on BOTH sides but do not tighten the nuts all the way just yet.
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/IMG_1894.jpg
-Install the top of the shock into its new mounting location with a 10mm bolt as pictured. As you can see, one bolt goes one direction, and one bolt goes the other direction, this was due to a clearance issue getting the bolts in place.
http://i79.photobucket.com/albums/j158/rubberdown/Lift%20Kit%20King%20Quad/P5112659.jpg
-Put the tires back on and the front is finished!