OnlyPolaris

Hey man, thanks for all your help! I got my tires on last week and everything looks good. UPS delivered my spacers this morning so I'll have to put them on tonight. Here is an album I created if you care to look: http://www.rubberdowncustoms.ca/foru...php?albumid=87

Thanks again,
Doug

Are you running stock axles with your lift, and if so any problem so far, tks

Gates

Thanks man, I have a pickle fork and trying to find out if thats the easiest way to do it. I'll try it your way and see what i get.

Thanks man, I'll try that. Also how did you get ur ball joints loose when you put in the lift?

Sup man, you wouldn't happen to know what size rubber washer goes inside the overflow bottle cap would ya? I lost mine.

yup i went with 1.5" all around. plus i have ranger springs in the front. i had to grind the struts. just used an angle grinder and then smoothed and polished it with a flapper wheel. i ground out enough that when the quad is sitting on the lift i could fit my hand between the boot and strut. i went over board this time because on my old 500 i didn't do enough and ripped a couple boots and had to take it all apart agaian.

Hi, your machine is looking better and better every time you post, I ended up buying an 08-800 but in the Sunset Red, did you have to grind the struts to add the 1 1/2" lift on the front, I'm assuming you went 1 1/2" all around, tks

ya i would say that is a good price with no winch. i paid $500 more with a winch

Hi, I'm looking at exactly the same machine as you have, got a price of 8200 + tax, just wondering if that is a good price, tks, no winch